Product Data Asia Pacific
epoxy adhesive system suitable for bonding a variety of
materials. Advantages,
z Long open time
z High shear and peel strength
z Easy to apply
z Good resistance to static and dynamic loads
z Electrically insulating
Typical Properties
Property EA-3020A EA-3020B
Color / Appearance Creamy Amber
Specific Gravity 1.17 0.92
Viscosity (Pas) 50,000 35,000
(After Mixing)
Mixing Ratio (by weight) 100 80
Pot Life 90 Minutes
Mixed Viscosity (Pas) 45,000
Recommended Cure Schedules
Temperature Handling Strength Minimum Cure Time
77F (25℃ ) 7 Hours 12 Hours
104F (40℃ ) 2 Hours 3 Hours
158F (70℃ ) 30 Minutes 50 Minutes
212F (100℃ ) 6 Minutes 10 Minutes
302F (150℃ ) 4 Minutes 5 Minutes

Typical Cured Properties
Shear Strength 68.3 kgf/cm2
Compressive Strength 1,491.72 kgf/ cm2
Tensile Strength 355.0 kgf/ cm2
Flexural Strength 537.2 kgf/ cm2
Coefficient of Thermal Expansion 80.6 um/m/℃
Thermal Conductivity (Hearter/A2) 0.1999 Kcal/mh℃
Storage Handling Information
EA-3020/A Resin and EA-3020/B Hardener should be stored
in tightly closed containers at room temperature in cool,
ventilated area. Keep containers closed to prevent moisture
absorption and contamination.
Provided this material is stored under the recommended
storage conditions in their original containers, it will remain
in useable condition for three years from the date of
shipment.
Precautions
Axismate™ products are generally quite harmless to handle provided that certain precautions normally
taken when handling chemicals are observed. The uncured materials must not, for instance, be allowed
to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the
uncured materials from coming in contact with the skin, since people with particularly sensitive skin may
be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the
use of eye protection. The skin should be thoroughly cleansed at the end of each working period by
washing with soap and warm water. The use of solvents is to be avoided. Disposable paper-not cloth
towels should be used to dry the skin. Adequate ventilation of the working area is recommended.